Detachable Twin Plate Holder Platform for Chauffeur, Private Hire Taxi & Minicab

Detachable / Removable Twin Plate Holder Platform for Private Hire cars, Taxi's & Minicabs
Manufacturer: Dynx Limited
SKU: DTPH-1001
Delivery date: 3-5 days
£24.95
£19.95

Removable/Detachable Twin plate Holder Platform for Chauffeur and Private Hire Cars, Taxi's and Minicabs

Follow the link below on YouTube to see how it works

https://youtu.be/a7QloD_1fV4


Follow the link below on YouTube for the instructions how to assemble the twin plate holder
https://youtu.be/FmAetFDBbcs
 

You don’t need to drill holes in bumper or body of your lovely car, simply mount the Detachable Twin plate holder when you are working or dismount when not working

If you are travelling with the family/friends and not working, you don't want to show the taxi plate attached to the car, your car will be treated with more respect on the road.

Or even if you mount the twin plate holder platform at the back of your car it will look much more decent with the two plates attached properly side by side instead of attaching license plate at the bumper or body of car (and causing damage by making extra holes) 

 Simply use our Twin Plate Attachment Platform to attach both plates (DVLA & Council) side by side. It fits precisely in to rear number plate space as shown in the pictures.

 Four clips are provided on the back side of plate which grip your existing normal rear DVLA registration plate. It takes few seconds to put the plate on when you are working and it can easily be removed by pressing from the top edges.

Want to save on postage and collect it personally? If you are a regular Heathrow visitor go to our re-sellers shop and also get your square DVLA number plat (11"x8") as wellRe-sellers : Motorist Discount Center, 524 London Road, Slough, SL3 8QR

Note : We will provide you the metal base platform with the set of 8 self-tapping screws and 4x metal washers. We will not be providing the council license plate holder or DVLA Registration number plate; these are shown here for the illustration purpose only.

Disclaimer  :  The ways in which plates and other identification products are displayed on private hire and commercial vehicles is decided by your local licensing authority and it is not a matter for this company. Different local councils have different rules and it is your (owners/Drivers) responsibility to ensure before purchasing any of our brackets, plate holders or plate platforms that their use complies with the terms and conditions which apply to your licence/permit.

---- PLEASE NOTE ----    (1). We will provide you the metal base platform with the set of 8 self-tapping screws and 4x metal washers. We will not be providing the council license plate holder or DVLA Registration number plate; these are shown here for the illustration purpose only.  (2). You will be required to make another square DVLA registration number plate (motorcycle style) recommended size is11inch wide x 8 inch high. (3). The size of this plate holder (including council /DVLA number plate fitted) is approx. 53cm wide and 21cm high, It will need approx. 21inch x 9inch (53cm x 23cm) space to operate while mounting or removing it from the top of existing number plate.  (4). We would like to advise that your existing DVLA long plate should be fitted and secured with multiple screws/washers (and NOT with the double sided sticky tape). Use small washers at the back of the number plate to give it enough space for the plate holder bracket clips to take proper secure grip.  (5). Please avoid using double sided sticky tapes to attach any of the plates on platform bracket or car number plates.

 

All rights reserved, Any unauthorized publishing, design copying or re-making will constitute an infringement of copyright, Commercial copying is prohibited. This fact sheet is Copyright © The UK Copyright Service and protected under UK and international law. The use of this fact sheet is covered by the conditions of a Dynx Limited. This fact sheet is intended only as an introduction to ideas and guidance only. It should not be treated as a definitive guide, nor should it be considered to cover every area of concern, or be regarded as legal advice.

 Dynx Limited,www.Dynx.co.uk

Customers who bought this item also bought

Square DVLA Registration Number Plate (11" x 8"Inch) Printing

Mainly we offer printing of the Square DVLA Registration Number Plate (11" x 8"Inch) and fitting service when you buy along with our Detachable Twin Plate Holder Platform. We also offer Number Plate printing and dispatch of different sizes.
£12.95 £11.95

2 x Replacement Springs for the Detachable twin plate holder platform

2 x Replacement Springs for the Detachable twin plate holder platform
£3.99 £2.75

Private Hire Taxi Minicab License Plate Holder Bracket Council plate platform

Taxi, Private Hire & Minicab License Plate Holder Bracket only , The size of the bracket is (25cm wide x 18.7cm high) and the council license which fits in it is 24.3cm wide x 18cm high (council license plate approx 9.5 inch wide x 7 inch high)
£14.95 £11.50

Twin Plate Holder Platform for Taxi, Private Hire & Minicab DVLA & License plate

Twin plate Holder Platform for Taxi, Private Hire, Minicab and Hackney, Permanently fixed at the back to hold both the plates, council License plate and DVLA registration license plate side by side.
From £12.50
30 inch ombre braiding hair jumbo braiding hair hair extensions pure lace wigs review best clip ins for 4c hair real hair wigs bellami vs luxy hair simply hair extensions hair extensions arda wigs beard dhwarak indian hair review hair extensions human hair for sale cheap blonde curly wig hair extensions uk